PDA

View Full Version : a big favour


k90rsa
2nd January 2007, 09:28 PM
hi all,

im not a meriva vxr owner but am lookin into a z16let engine conversion into my corsa c and was just wondering if anyone would be so kind as to take some detailed engine bay photos for me?

Sparky
2nd January 2007, 09:39 PM
try too but will have to be this weekend. What bits do you want?

k90rsa
3rd January 2007, 12:21 PM
thatd be great thanks mate,well ive been told that the cambelt side mount from a z18xe on a corsa c will fit straight onto the z16let,so i need a close up photo of that mount please,

also a pic of the location of the fusebox as the fusebox and all the necessary loom through to the interior on my c is in the top right of the engine bay i need to make sure ive got enough slack on the looms to make it look tidy and reach through if you know what i mean.

ive also been told that the z18xe gearbox is usable with the engine which'll save me the trouble of finding different driveshafts as i can use the z18xe ones so just after clarifying if ne1 has any knowledge of the z18xe gearbox if it will mate up fine with the z16let,

any help will be much appreciated :)

Sparky
3rd January 2007, 10:48 PM
I'll get them asap. The fuse box is on the passenger side of the car so guess its same as yours? The gearbox is a m32 so you will need to check this.

k90rsa
21st January 2007, 07:07 PM
just wondering if any1 managed to get any photos for me,thanks

dave

Sparky
21st January 2007, 10:09 PM
ooooooooooo, ny fault forgot. DO it asap for you, sorry.

CHRISR
21st January 2007, 10:13 PM
Airbox over drivers side engine mount
http://mysite.orange.co.uk/chrisreayextrapics/Z16LET_037.jpg
Rear gearbox mount
http://mysite.orange.co.uk/chrisreayextrapics/Z16LET_007.jpg
Engine bay
http://mysite.orange.co.uk/chrisreayextrapics/Z16LET_026.jpg
Front gearbox mount
http://mysite.orange.co.uk/chrisreayextrapics/Z16LET_028.jpg
Top gearbox mount
http://mysite.orange.co.uk/chrisreayextrapics/Z16LET_041.jpg

k90rsa
21st January 2007, 10:19 PM
thanks alot mate much appreciated

alex_c
21st January 2007, 10:21 PM
If you contact Jon @ Courtenays he should be able to help as they have fitted a few Clet/Zlet's into Corsa's and should be able to point you in the right direction with regards the loom and stuff like immoblisers and ECU's