Forum: How to | Meriva VXR

first empty a bit of coolant out by taking one of the pipes of the header tank then take you throttle body pipe off then you have to remove the wire...

rite guys as you all know im to tight to pay anyone to do anything on my merv so heres a little guide for you on fitting a recirc valve if you handy...

rite guys using a flat screw driver i removed the plastic cover found in the center ov the rear of the screen cover then using a t15 (torx 15)...

After lots of pondering as to where to fit it i setteled on the top of the short A piller where there is no airbag so heres how i did it 1/ REMOVE...

Some people have experienced that the instructions in the user manual only results in a beep, so here are the instructions that does the trick: 1)...

Tools needed: - Torx E10 spanner - 13 mm socket Here is a good drawing of the Z16LET engine: (original 1920x1600 pixel version can be found...

It has come to that 10k cleaning time again on my Zafira GSi but this is the same for anyone owning a Dbilas Flowmaster. Don't know if people that...

Only works if you have the display that shows fuel consumption... 1) Hit the "Settings" button on the radio 2) Press down button until it shows...

Basically there are three ways of doing it; 1) Leaving the bottom of stock air filter box in place 2) Removing the stock air filter box 3)...