+ Reply to Thread
Page 47 of 47 FirstFirst ... 37 45 46 47
Results 461 to 464 of 464
  1. #461
    VXR enough andrewt1971's Avatar
    Join Date
    25th January 2010
    Posts
    3,185

    Default

    Had a bit of a setback yesterday, I went to do a final test fit on all the front suspension and my new longer tierods are too long, back to the part catalogues...

    so reassembled the sadev diff..



    Gear cluster back in



    Casing going back on



    Slave cylinder fitted



    Clutch hoses made up complete with remote bleed nipple and dry break coupling.


  2. #462
    VXR Nothing comes close w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    12,540

    Default

    You sent a job application into any of the formula one pit teams yet?
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  3. #463
    VXR enough andrewt1971's Avatar
    Join Date
    25th January 2010
    Posts
    3,185

    Default

    I wish...

  4. #464
    VXR enough andrewt1971's Avatar
    Join Date
    25th January 2010
    Posts
    3,185

    Default

    So other stuff has been getting in the way lately and i've not had time to work on the car, when i finally got a chance to test fit the new new tie rods, steering arms etc the bump steer was back! After a lot of head scratching, measuring and swapping parts about I discovered the steering rack wasn't centered and a tiny amount of play in the column coupling so it would wander about. Anyway, today I red did the bump steer checks, making sure they were 100% repeatable, and now need to make more tie rod adapters and spacers for the rose joint to the steering arm. Whilst it was all together I checked the caliper mount spacers, bearing carrier etc and fitted a wheel to check the suspension travel, the last photo shows the suspension just touching the bump stop.



+ Reply to Thread
Page 47 of 47 FirstFirst ... 37 45 46 47

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts