+ Reply to Thread
Page 5 of 5 FirstFirst ... 3 4 5
Results 41 to 48 of 48

Thread: Astra

  1. #41
    VXRed vocky's Avatar
    Join Date
    5th April 2015
    Posts
    172

    Default

    Some extra info;

    I went from a CD400+ straight to the Navi 950, just by swapping the correct OEM parts shown in my previous posts
    VCI codes for retro-fitting Intellilink will only be given for post 2014 models
    It took several hours to carry out all the required VCI stuff, it is not a simple tick box exercise with a MDI Tech 3

  2. #42
    VXR Nod Left, Nod Right w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    12,883

    Default

    I'll stick to my good old switch on with tech2
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  3. #43
    VXRed vocky's Avatar
    Join Date
    5th April 2015
    Posts
    172

    Default

    Added the Courtenay intake system to complete the stage 2 package

    Last edited by vocky; 4th July 2017 at 12:06 PM.

  4. #44
    VXRed vocky's Avatar
    Join Date
    5th April 2015
    Posts
    172

    Default

    I changed the front brake pads today, they were the factory originals which had done 11750 miles in 30 months and still had just over 5mm left.
    I didn't want to have to change them over the winter months so another job crossed off the list

    I swapped over to Opel badges the other week, fitting the Opel airbag was the hardest part, otherwise it was very easy to do. The rear badge is actually stuck onto a round disc, not the hatchback door.

    Last edited by vocky; 24th October 2017 at 12:06 PM.

  5. #45
    VXRed
    Join Date
    5th April 2017
    Posts
    212

    Default

    sexy as out ,mate

  6. #46
    VXRed vocky's Avatar
    Join Date
    5th April 2015
    Posts
    172

    Default

    I have retrofitted an OEM rear parking camera, just above the number plate, next job is to get Rusty to work his magic to enable it


  7. #47
    VXRed
    Join Date
    1st April 2016
    Posts
    148

    Default

    What do you need to get that all working?

    I have the Navi950 on MY16

  8. #48
    VXRed vocky's Avatar
    Join Date
    5th April 2015
    Posts
    172

    Default

    It's not much wiring, just two screened wires to the rear of the Navi 950 control box, one wire from ignition +12v (sourced from the dash fuse box), one wire from reverse light feed and a 0v from the chassis.

    Hardest part was removing the bumper to cut the hole required. The Tech 3 is not quite so simple, some magic will be required to enable it due to the GTC never coming with the reversing camera from the factory.

    ps: it also requires the OEM rear parking sensors
    Last edited by vocky; 13th December 2017 at 11:24 AM.

+ Reply to Thread
Page 5 of 5 FirstFirst ... 3 4 5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts