+ Reply to Thread
Page 1 of 17 1 2 3 11 ... LastLast
Results 1 to 10 of 170
  1. #1
    They see me rolling
    Join Date
    31st January 2009
    Posts
    2,456

    Default Liam's Mighty Red 2

    Since I'm back in a VXR and this time a J and not a H I better start a thread up!. Picked the car up yesterday and I had literally only had the car 5 minutes and driven 1 mile before I had something done to the car as I can't leave them alone lol.

    There she is getting her first thing done



    Headlights getting tinted as you can see left light done and right light standard so you can see the difference :



    Both done :



    As always the garage never clean the car properly to my own standard but I only managed to get the one picture and my phone went flat typical!.



    I'll update this thread as I go along as always as it goes through the stages. Could also be going through some development work but if that happens I'm sure use will find out .


    Sent from my iPhone using Tapatalk

  2. #2
    VXR enough Arctic martin's Avatar
    Join Date
    27th December 2012
    Posts
    4,278

    Default

    What did you use laminX?
    WG Motorworks Fully forged Astra Vxr Arctic ...
    Rabbid tuned... TD Stage 3 hybrid, Piper valve springs, piper cams, klasen inlet manifold, Courtney cdti conversion, Airtec front mount intercooler, 3" scorpion exhaust, Turbosmart actuator, Forge recirc valve, Quaife LSD, Helix Clutch & SMF, Rear anti roll bar, blue & red SMD conversion , bi xenons and CD70

  3. #3
    VXR Nothing comes close VXRRy's Avatar
    Join Date
    15th May 2013
    Posts
    17,824

    Default

    Looks class Liam, good to see you back and what you have planned.

    I hope to at some point join club J!


    Sent from my iPhone you Android Scumbags!!!

  4. #4
    They see me rolling
    Join Date
    31st January 2009
    Posts
    2,456

    Default

    Quote Originally Posted by VXRRy View Post
    Looks class Liam, good to see you back and what you have planned.

    I hope to at some point join club J!


    Sent from my iPhone you Android Scumbags!!!
    Cheers Ry! Can you believe I'm not even driving it its away for winter now lol

    Quote Originally Posted by Arctic martin View Post
    What did you use laminX?
    Lamin X is the best




    Sent from my iPhone using Tapatalk

  5. #5
    VXR enough Arctic martin's Avatar
    Join Date
    27th December 2012
    Posts
    4,278

    Default

    Quote Originally Posted by Liam View Post


    Lamin X is the best

    Sent from my iPhone using Tapatalk
    I want to get mine done but I can't find anywhere near me that does it, all using flyeye
    WG Motorworks Fully forged Astra Vxr Arctic ...
    Rabbid tuned... TD Stage 3 hybrid, Piper valve springs, piper cams, klasen inlet manifold, Courtney cdti conversion, Airtec front mount intercooler, 3" scorpion exhaust, Turbosmart actuator, Forge recirc valve, Quaife LSD, Helix Clutch & SMF, Rear anti roll bar, blue & red SMD conversion , bi xenons and CD70

  6. #6
    They see me rolling
    Join Date
    31st January 2009
    Posts
    2,456

    Default

    Quote Originally Posted by Arctic martin View Post
    I want to get mine done but I can't find anywhere near me that does it, all using flyeye
    I would never personally ever use that stuff! Looks naff and tacky as hell in my opinion!


    Sent from my iPhone using Tapatalk

  7. #7
    VXR enough Arctic martin's Avatar
    Join Date
    27th December 2012
    Posts
    4,278

    Default

    Had it on my halogen headlights still got it on my rear lights want to take it off but worried it will leave marks and damage the lights, defiantly wouldn't put it on my bi xenons,

    Just curious did you sell your pillar pod out of your H in the end?
    WG Motorworks Fully forged Astra Vxr Arctic ...
    Rabbid tuned... TD Stage 3 hybrid, Piper valve springs, piper cams, klasen inlet manifold, Courtney cdti conversion, Airtec front mount intercooler, 3" scorpion exhaust, Turbosmart actuator, Forge recirc valve, Quaife LSD, Helix Clutch & SMF, Rear anti roll bar, blue & red SMD conversion , bi xenons and CD70

  8. #8
    They see me rolling
    Join Date
    31st January 2009
    Posts
    2,456

    Default

    Quote Originally Posted by Arctic martin View Post
    Had it on my halogen headlights still got it on my rear lights want to take it off but worried it will leave marks and damage the lights, defiantly wouldn't put it on my bi xenons,

    Just curious did you sell your pillar pod out of your H in the end?
    Never used it buddy so I can't help you there but I'm sure if it's heated up it won't do any damage to the light itself.

    I had Lamin X on my old Bi Xenons looked the *******s!

    I did buddy it was the first thing I sold.


    Sent from my iPhone using Tapatalk

  9. #9
    The only slow captain on vxro CaptainSlow's Avatar
    Join Date
    12th April 2009
    Posts
    20,148

    Default

    Looks epic mate!

    Is that your own garage? Looks class
    Opel Nürburgring Edition No.534 / IG - ItzMrGoodKat

  10. #10
    They see me rolling
    Join Date
    31st January 2009
    Posts
    2,456

    Default

    Quote Originally Posted by CaptainSlow View Post
    Looks epic mate!

    Is that your own garage? Looks class
    Thanks buddy

    It's not its my works garage unfortunately lol


    Sent from my iPhone using Tapatalk

+ Reply to Thread
Page 1 of 17 1 2 3 11 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts