435bhp 410ftlb astra J VXR
RSS induction, RSS Fully Forged, 3" turbo back, Forge FMIC, EFR6758, Nortech Mani, Proalloy water rad, 2way KW Clubsports, Forge brace, 1/2 Roll cage, Recaro Pole Posistion, Forge braied lines, AP Racing 362mm & Pagid RS29, lightend fly & uprated clutch
Damn, I bet it's the brake master cylinder tucked in the corner on our cars which gets in the way
I buy quite a few USA parts to tune the z22se engines, they are always much cheaper, however one needs to remember sometimes LHD parts just won't fit.
What about the Regal version ?
http://zzperformance.com/ecotec/air-...ow-intake.html
I did look at that one too, perhaps later this year I will import one and give it a try.
so the one for a Buick Regal 2012 might be an option, which is the usa insignia![]()
After some more research it seems vxrdave has already imported and tried these intakes and the shape is all wrong for our Astra J, shame![]()
Last edited by vocky; 12th January 2017 at 03:55 PM. Reason: info
Hi Vex , i have some Billet Maf housings for sale if your interested and postage to Australia would be around £30 just for the housing , you would only need to then source a filter etc .
Project J is hereCarbon Parts for Astra J Or vectra vxr brake conversions to astra/corsa please PM
Bookmarks