+ Reply to Thread
Page 3 of 6 FirstFirst 1 2 3 4 5 ... LastLast
Results 21 to 30 of 58
  1. #21
    VXR Nothing comes close VXRRy's Avatar
    Join Date
    15th May 2013
    Posts
    16,166

    Default

    Not bad value that really


    Sent from my iPhone using Tapatalk

  2. #22
    VXR enough stevenbarrowVXR's Avatar
    Join Date
    21st November 2013
    Posts
    3,914

    Default

    It really is mate and the benefits it gives you when mapping are massive, for me it be pointless for you to spend money on a new cooler when you could buy wmi as it better than any cooler you could buy and then you get other benefits from it as well when tuning
    Rabbid Tuned Stage 4.5 - 355bhp - TD S3 Hybrid, AET ported exhaust manifold, TS 10psi actuator, TS recirc valve, Full 3" Piper decat non-res exhaust, Forge intercooler, AEM dual nozzle WMI kit, cdti hose with AEM cone, Regal cams, Klasen inlet manifold, Piper single valve springs, Percy retainers, PEC i-beam rods+ARP bolts, Skimmed Head, Protec 340lph fuel pump, Siemens 630cc injectors, AP front big brake kit, Vectra VXR rear brake conversion

  3. #23
    VXR Nothing comes close w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    10,913

    Default

    Is it complicated to set up?
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  4. #24
    VXR enough stevenbarrowVXR's Avatar
    Join Date
    21st November 2013
    Posts
    3,914

    Default

    Naw really simple mate, 2-3 hours fitting time, easy enough to do if you can do wiring and are competent mechanically, its basic stuff. If you actually mean dialling it in then that just takes a bit of playing with settings on the controller until it does what you want it to do but again its basic stuff and when getting mapped the tuner can fine tune it ever more but you can set it up yourself with a bit of common sense
    Rabbid Tuned Stage 4.5 - 355bhp - TD S3 Hybrid, AET ported exhaust manifold, TS 10psi actuator, TS recirc valve, Full 3" Piper decat non-res exhaust, Forge intercooler, AEM dual nozzle WMI kit, cdti hose with AEM cone, Regal cams, Klasen inlet manifold, Piper single valve springs, Percy retainers, PEC i-beam rods+ARP bolts, Skimmed Head, Protec 340lph fuel pump, Siemens 630cc injectors, AP front big brake kit, Vectra VXR rear brake conversion

  5. #25
    VXR Nothing comes close w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    10,913

    Default

    I'd be no good
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  6. #26
    VXR enough stevenbarrowVXR's Avatar
    Join Date
    21st November 2013
    Posts
    3,914

    Default

    Well if you know anybody who competent with electrics etc that should be enough to do the job
    Rabbid Tuned Stage 4.5 - 355bhp - TD S3 Hybrid, AET ported exhaust manifold, TS 10psi actuator, TS recirc valve, Full 3" Piper decat non-res exhaust, Forge intercooler, AEM dual nozzle WMI kit, cdti hose with AEM cone, Regal cams, Klasen inlet manifold, Piper single valve springs, Percy retainers, PEC i-beam rods+ARP bolts, Skimmed Head, Protec 340lph fuel pump, Siemens 630cc injectors, AP front big brake kit, Vectra VXR rear brake conversion

  7. #27
    VXR Nothing comes close w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    10,913

    Default

    Any wiring to the cockpit?
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  8. #28
    VXR Nothing comes close w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    10,913

    Default

    You got any pics of your car Steven? Bay too maybe. It's quite an awesome spec
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  9. #29
    VXR enough stevenbarrowVXR's Avatar
    Join Date
    21st November 2013
    Posts
    3,914

    Default

    Check out my progress thread mate, loads of pic on there of my bay and the wiring done when we were fitting the wmi. Basically running wires from the pump and tank to the controller which i placed in glovebox so came down that side of the car

    http://www.vxronline.co.uk/forum/sho...?243710-my-vxr

    Dont really update my thread much anymore because my photobucket doesnt really work properly anymore for some reason and i dont know any other way to upload pics lol
    Rabbid Tuned Stage 4.5 - 355bhp - TD S3 Hybrid, AET ported exhaust manifold, TS 10psi actuator, TS recirc valve, Full 3" Piper decat non-res exhaust, Forge intercooler, AEM dual nozzle WMI kit, cdti hose with AEM cone, Regal cams, Klasen inlet manifold, Piper single valve springs, Percy retainers, PEC i-beam rods+ARP bolts, Skimmed Head, Protec 340lph fuel pump, Siemens 630cc injectors, AP front big brake kit, Vectra VXR rear brake conversion

  10. #30
    VXR Nothing comes close w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    10,913

    Default

    Tapatalk mate lol. That's what I use now
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

+ Reply to Thread
Page 3 of 6 FirstFirst 1 2 3 4 5 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts