+ Reply to Thread
Page 16 of 22 FirstFirst ... 6 14 15 16 17 18 ... LastLast
Results 151 to 160 of 215
  1. #151
    VXRed ash121186's Avatar
    Join Date
    30th June 2014
    Posts
    172

    Default

    o are they I dint know seeing you got different bracket then me there might be different size but I'll just go with 25mm then

    Sent from my SM-G925F using Tapatalk

  2. #152
    VXR Nothing comes close w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    12,391

    Default

    They all house the same sensor though don't they.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  3. #153
    VXRed ash121186's Avatar
    Join Date
    30th June 2014
    Posts
    172

    Default

    yh thinking about it now it all got to be the same size as the sensors only comes in one size lpl

    Sent from my SM-G925F using Tapatalk

  4. #154
    VXR Nothing comes close w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    12,391

    Default

    I think when my holes are drilled the correct bracket should slot perfectly into them and follow the contours of the bumper.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  5. #155
    VXRed ash121186's Avatar
    Join Date
    30th June 2014
    Posts
    172

    Default

    yh i think that's why my sensors sits on a slight angle inside the bracket to take you the shape of the bumper so the don't point up or down to much of you gets what I mean

    Sent from my SM-G925F using Tapatalk

  6. #156
    VXR Nothing comes close w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    12,391

    Default

    That's it mate. Helps as a marker to make sure they go in the right place too.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  7. #157
    VXR Nothing comes close w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    12,391

    Default

    Bumper drilled. Dead easy. Only thing now though is you can see a small ring of unpainted bumper when you slot the bracket in. However i'm going to prime and spray power red from behind to re colour the inner ring. Then it should get rid of it
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  8. #158
    VXRed ash121186's Avatar
    Join Date
    30th June 2014
    Posts
    172

    Default

    that's good mate and I got a toutch up stick and think I got some blue spray left as well so I will remember to paint them before I glue the brackets to the bumper .... well my new sensor came yesterday and it came with a black seal and it stands out so he's going back and now I got to try to get a new cheap sensor as I only need the clear rubber seal .... and the 25m hole saw was ok then mate .

    Sent from my SM-G925F using Tapatalk

  9. #159
    VXR Nothing comes close w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    12,391

    Default

    Yeah it was ample size mate. Slots in with a fraction to spare as well.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  10. #160
    VXRed ash121186's Avatar
    Join Date
    30th June 2014
    Posts
    172

    Default

    that's good then mate I will buy a 25mm hole saw now
    I definitely knows that's the right size

    Sent from my SM-G925F using Tapatalk

+ Reply to Thread
Page 16 of 22 FirstFirst ... 6 14 15 16 17 18 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts