+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    VXR newbie
    Join Date
    12th July 2017
    Posts
    5

    Default Engine Management Light

    Hi Guys
    can you help, just had a full 3inch straight through system installed and now my engine management light is on, is this normal until i have it mapped out

    Another thing ive got the spanner light on which when plugged in says i need a new boost solenoid sensor, but since the engine management light has come this other Light has gone off,

    thanks
    Anthony

  2. #2
    VXR enough andrewt1971's Avatar
    Join Date
    25th January 2010
    Posts
    3,185

    Default

    Check the clamp that holds the exhaust to the exhaust housing isn't fouling the turbo actuator. 90% of the time error codes immediately after an exhaust swap are caused by this.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts