+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    VXRed ash121186's Avatar
    Join Date
    30th June 2014
    Posts
    174

    Default nurbugring sill covers

    hi all what's the best method to bring back the shine in the Astra h vxr nurbugring will covers / kickplates as mine is starting to look dull in places thanks

    Sent from my SM-G950F using Tapatalk

  2. #2
    VXR "Appreciated" VeXeR's Avatar
    Join Date
    20th January 2014
    Posts
    1,633

    Default

    Assuming they're not yellowing;
    Wash them with soapy water.
    Wipe clean with isopropyl alcohol.
    Allow to dry.
    Use an acrylic based clear sealant- buff on a very fine layer and allow to dry.
    OPC ÉIRE
    Drop me a PM for Irish meets, group adds etc.

  3. #3
    VXRed ash121186's Avatar
    Join Date
    30th June 2014
    Posts
    174

    Default

    thanks mate. well one side got a little bit of over spray on it and a few marks on it I was told to use a fine bit of wet and dry sand paper and to cut it back then polish them but ain't to sure if that would work and don't want to try it as u don't want to buy a new set if it goes wrong

    Sent from my SM-G950F using Tapatalk

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts