+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 42
  1. #1
    VXRed blooded Damo24LFC's Avatar
    Join Date
    18th September 2017
    Posts
    479

    Wink MAP sensor on top hat

    Anyone any ideas about this sensor.

    W20ADM I know you’ll probably answer this
    07 Arden blue VXR(H). 3” scorpion turbo back, pipercross cone filter, front mounted intercooler. Running stage 2 map dyno tested at 290bhp 340 lb torque.
    Black rear diffuser, black boot trim, black tinted windows. Piano black console and steering wheel trims. Carbon fibre dash trims.

  2. #2
    VXR Adam"san" w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    15,479

    Default

    What do you mean by "ideas" mate? You suspecting there's a problem with it as usual?
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  3. #3
    VXRed blooded Damo24LFC's Avatar
    Join Date
    18th September 2017
    Posts
    479

    Default

    YEH but honestly there is so something I just don’t know what yet I’m 100% sure there’s summit not working right. What does it do and do you know the symptoms of it not working properly
    07 Arden blue VXR(H). 3” scorpion turbo back, pipercross cone filter, front mounted intercooler. Running stage 2 map dyno tested at 290bhp 340 lb torque.
    Black rear diffuser, black boot trim, black tinted windows. Piano black console and steering wheel trims. Carbon fibre dash trims.

  4. #4
    VXRed blooded Damo24LFC's Avatar
    Join Date
    18th September 2017
    Posts
    479

    Default

    But if ya getting sick off me just tell me to do one I don’t mind
    07 Arden blue VXR(H). 3” scorpion turbo back, pipercross cone filter, front mounted intercooler. Running stage 2 map dyno tested at 290bhp 340 lb torque.
    Black rear diffuser, black boot trim, black tinted windows. Piano black console and steering wheel trims. Carbon fibre dash trims.

  5. #5
    VXR Adam"san" w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    15,479

    Default

    Do one

    Lol, don't be daft. It's called the manifold absolute pressure sensor. As the name suggests it records the pressures coming through the boost pipe and sends it to the ecu to regulate timing etc.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  6. #6
    VXRed blooded Damo24LFC's Avatar
    Join Date
    18th September 2017
    Posts
    479

    Default

    Ok think I’m Gona changed it lol.

    I’m still getting slight hesitation on slow acceleration at 2.5k hesitates for split second it’s like I release the pedal then put it down again
    07 Arden blue VXR(H). 3” scorpion turbo back, pipercross cone filter, front mounted intercooler. Running stage 2 map dyno tested at 290bhp 340 lb torque.
    Black rear diffuser, black boot trim, black tinted windows. Piano black console and steering wheel trims. Carbon fibre dash trims.

  7. #7
    VXR Adam"san" w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    15,479

    Default

    Do you have a direct route intake?
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  8. #8
    VXRed blooded Damo24LFC's Avatar
    Join Date
    18th September 2017
    Posts
    479

    Default

    Not sure, I’ve got a pipe from front mounted intercooler to the top hat.

    Whilst I mention top hat is there any point in me changing it to an enlarged top hat or will it not make a lot of difference
    07 Arden blue VXR(H). 3” scorpion turbo back, pipercross cone filter, front mounted intercooler. Running stage 2 map dyno tested at 290bhp 340 lb torque.
    Black rear diffuser, black boot trim, black tinted windows. Piano black console and steering wheel trims. Carbon fibre dash trims.

  9. #9
    VXRed blooded Damo24LFC's Avatar
    Join Date
    18th September 2017
    Posts
    479

    Default

    I’ve got a crossover delete pipe on to cone filter
    07 Arden blue VXR(H). 3” scorpion turbo back, pipercross cone filter, front mounted intercooler. Running stage 2 map dyno tested at 290bhp 340 lb torque.
    Black rear diffuser, black boot trim, black tinted windows. Piano black console and steering wheel trims. Carbon fibre dash trims.

  10. #10
    VXR Adam"san" w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    15,479

    Default

    I'd definitely change tophat and power pipe mate. Will improve response. I'll take a pic of my bay at some point and show you my setup.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts