+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    VXRed MbrownVXR08's Avatar
    Join Date
    10th October 2016
    Posts
    187

    Default Bi xenon fitting

    Lights arrived today from the breakers. They have the 2 silver boxes on which I believe are the igniter and power ballast. They also came with the connector and about a foot of the loom from the other car and Still have the bulbs also lol. I have been looking at retrofitting how too’s however they’re all for hid kits which I don’t need. Any advice on what wiring I need to do and how would be greatly appreciated?



    Sent from my iPhone using Tapatalk

  2. #2
    VXRed blooded WHASSUPJOE's Avatar
    Join Date
    10th August 2006
    Posts
    442

    Default

    you'll need the earth mod looms for plug and play ,available on ebay and then using ***** to program them in

  3. #3
    VXRed MbrownVXR08's Avatar
    Join Date
    10th October 2016
    Posts
    187

    Default

    I think I’m going to take the 8 pin block off and then solder the wires to the 10 pin block wires that have come with the lights. This should then leave 2 earth wires ready to ground on a nearby grounding point 😊 will then get them activated by a nearby tech2. Can you send me a link for the loom on eBay? Would be interested to take a look



    Sent from my iPhone using Tapatalk

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts