+ Reply to Thread
Page 6 of 6 FirstFirst ... 4 5 6
Results 51 to 54 of 54
  1. #51
    VXRed
    Join Date
    14th January 2018
    Posts
    29

    Default

    Quote Originally Posted by w20adm View Post
    The factory ones are t20 torx. I'm a stickler for oe parts lol
    I actually might order the right ones. Is it a nut and bolt or an actual screw?

    Sent from my SM-A510F using Tapatalk

  2. #52
    VXR Nod Left, Nod Right w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    13,492

    Default

    Torx screw mate.

    Get on the blower to autovaux and get a few ordered. They're used in pretty much all the panel screws inside and out.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  3. #53
    VXRed
    Join Date
    14th January 2018
    Posts
    29

    Default

    Good advice mate, ordered the screws and inserts from Autovaux, never heard of them actually & they were really helpful. Will be using them in the future.

    Going to remove the boot strip and finally get the griffen off too this weekend. And the search for a VXR rear bumper is underway...


    Sent from my SM-A510F using Tapatalk

  4. #54
    VXRed
    Join Date
    14th January 2018
    Posts
    29

    Default

    GRIFFEN REMOVED

    Got the tailgate badge off today, went much easier than I imagined.
    Used the heat gun and tooth floss method.
    Big improvement IMO.
    Before During After

    Sent from my SM-A510F using Tapatalk

+ Reply to Thread
Page 6 of 6 FirstFirst ... 4 5 6

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts