+ Reply to Thread
Results 1 to 5 of 5
  1. #1
    VXRed
    Join Date
    15th November 2017
    Posts
    16

    Default Can anybody help - rror code 0100 (06)

    Hi guys!

    Can anybody help? I have an error code which is 0100 06, which I'm aware is MAF circuit related. I have changed the sensor, checked all of my vac lines, boost pipes etc and the code is still coming back each time after a hard reset (battery disconnect for 20 mins).

    My MAF loom has been extended, however all wires look fine and in tact. Is there anything else I can try or look out for? Really bugging me now, as my car boosts absolutely fine and then goes into a limp mode after maybe 1 mile every single time I drive it..

    Thanks in advance for any help/advice

  2. #2
    VXR enough nippyrascal's Avatar
    Join Date
    25th September 2013
    Posts
    1,071

    Default

    you sure the extension was not mixed up the wires and joined one to the wrong one , is maf around the right way .
    stage 3

  3. #3
    VXRed
    Join Date
    15th November 2017
    Posts
    16

    Default

    Thanks for the reply.

    The MAF extension was done when I got the car over a year ago and I've never had any issues at all until now. And yes, MAF is in correctly.
    Last edited by epackwoodvxr; 3rd April 2018 at 05:02 PM.

  4. #4
    VXRed
    Join Date
    15th November 2017
    Posts
    16

    Default

    Any more thoughts on this? Problem is still present..

    Thanks in advance

  5. #5
    VXR enough
    Join Date
    26th February 2012
    Posts
    1,771

    Default

    Try cleaning the maf with electrical contact spray

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts