+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23
  1. #1
    VXRed Vxr..'s Avatar
    Join Date
    1st March 2018
    Posts
    80

    Default Help with my exhaust

    Can any tell me if this is a standard exhaust
    I think
    Sorry for bad pics it’s too low to get under and no access to a jack at the min.

    I ask this because cat is blowing and I want to replace it ASAP.



    Sent from my iPhone using Tapatalk

  2. #2
    VXRed blooded 20Drift's Avatar
    Join Date
    20th March 2015
    Posts
    339

    Default

    Looks standard, but should just be the flexi joint that needs replacing looking at the 3rd pic
    Corsa VXR - Stage 2 Rabbid Remapped
    TD Pro Race 1.2's | Airtec Intercooler | Brembo Drilled/Grooved Discs | K&N 57s Induction | NGK Iridium Spark Plugs
    Remus 3 Piece | EP Silencer Delete | Remus Cat Back | 5000K HIDs | Boost & Water Temp Gauge | Pressed Plates

  3. #3
    VXRed Vxr..'s Avatar
    Join Date
    1st March 2018
    Posts
    80

    Default

    Thanks. Is that a easy change has in the 2nd pic there’s nothing to un bolt
    Also if I was to order a sports cat what’s the standard size

  4. #4
    VXRed blooded 20Drift's Avatar
    Join Date
    20th March 2015
    Posts
    339

    Default

    Not sure on the Astra but may be a cut and weld job unless it’s cheaper to get a new downpipe.

    Think the Astra is 3” but again not 100%
    Corsa VXR - Stage 2 Rabbid Remapped
    TD Pro Race 1.2's | Airtec Intercooler | Brembo Drilled/Grooved Discs | K&N 57s Induction | NGK Iridium Spark Plugs
    Remus 3 Piece | EP Silencer Delete | Remus Cat Back | 5000K HIDs | Boost & Water Temp Gauge | Pressed Plates

  5. #5
    VXRed Vxr..'s Avatar
    Join Date
    1st March 2018
    Posts
    80

    Default

    Ah so it the down pipe I need to be looking at
    I’ll price one up saves messing about

  6. #6
    VXR Adam"san" w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    14,749

    Default

    It's definitely a standard pre cat anyway.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  7. #7
    VXRed Vxr..'s Avatar
    Join Date
    1st March 2018
    Posts
    80

    Default

    If I was to get a de cat down pipe would it put eml on and join up to the standard exhaust
    Last edited by Vxr..; 16th April 2018 at 11:27 PM.

  8. #8
    VXR Adam"san" w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    14,749

    Default

    There's plenty of pre cat decats for oe systems. And there shouldn't be an eml issue as long as the main cat is in place.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  9. #9
    VXRed Vxr..'s Avatar
    Join Date
    1st March 2018
    Posts
    80

    Default



    Would this fit


    Sent from my iPhone using Tapatalk

  10. #10
    VXR Nothing comes close VXRRy's Avatar
    Join Date
    15th May 2013
    Posts
    17,548

    Default

    Quote Originally Posted by Vxr.. View Post


    Would this fit


    Sent from my iPhone using Tapatalk
    Yep. That's what I referred to earlier in the thread


    Sent from my iPhone using Tapatalk

+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts