+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 18 of 18
  1. #11
    VXRed
    Join Date
    25th October 2017
    Posts
    78

    Default

    Also where would I locate the peps door sensor. And would I be able to tell if it is dud?

    Sent from my SM-G960F using Tapatalk

  2. #12
    VXR Adam"san" w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    18,193

    Default

    Get a duracell mate. Hopefully you'll be pleasantly surprised. I couldn't believe it'd actually work. But you'd be surprised.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  3. #13
    VXRed
    Join Date
    25th October 2017
    Posts
    78

    Default

    Ok mate great I'll go try and find one. I'll let you no . That'll defo be cheaper than the garage looking at it.

    Sent from my SM-G960F using Tapatalk

  4. #14
    VXR Adam"san" w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    18,193

    Default

    There's sensors on each door, behind the rear bumper for the boot and behind the handbrake cup holder trim underneath.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  5. #15
    VXRed
    Join Date
    25th October 2017
    Posts
    78

    Default

    Well I have replaced it with a duracell and it worked. So I went and got other fob to see if it was fob or car that was working and it didn't work. So changed that battery to duracell aswell. And they both now work. Let's hope it keeps working... if it does you are a legend. !!

    Sent from my SM-G960F using Tapatalk

  6. #16
    VXR Adam"san" w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    18,193

    Default

    Told ya ......

    The fobs seem to have a design flaw with the connections. The chunky battery of duracell seems to overcome all this.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

  7. #17
    VXRed
    Join Date
    25th October 2017
    Posts
    78

    Default

    Still working ..
    Also looking at getting a cdti airbox. To remove crossover I tried open cone just to noisy for me.
    Would a 1.7cdti aribox fit or had it got to be 1.9cdti.
    And also does it need to be missed or is it just a straight swap.

    Sent from my SM-G960F using Tapatalk

  8. #18
    VXR Adam"san" w20adm's Avatar
    Join Date
    23rd June 2010
    Posts
    18,193

    Default

    Needs to be bored out to 80mm from 70mm mate.
    W20 ADM's led Lighting shop, see link below for details
    http://www.vxronline.co.uk/forum/sho...-lighting-shop

+ Reply to Thread
Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts