+ Reply to Thread
Results 1 to 6 of 6
  1. #1
    VXRed
    Join Date
    9th January 2018
    Posts
    69

    Default Oil Temperature Gauge Install - Help!

    Morning all, I've just purchased a oil temperature gauge from ebay. But I don't know how to set this gauge up. Does anyone live local to Bromley who could possibly give me a hand?

  2. #2
    VXR enough Markpvxr's Avatar
    Join Date
    10th July 2012
    Posts
    1,122

    Default

    You need an oil banjo drilled and tapped to put your sender in, Then replace your existing bolt by the oil filter (oil pump bolt) It's the right hand side one you replace
    Arden Astra with black bits

  3. #3
    VXRed
    Join Date
    9th January 2018
    Posts
    69

    Default

    The one I ordered comes with a oil temp sensor. Would I need to buy another part to fit this then (e.g banjo Bolt)


    Sent from my iPhone using Tapatalk

  4. #4
    VXR enough Markpvxr's Avatar
    Join Date
    10th July 2012
    Posts
    1,122

    Default

    You will need to get your existing bolt drilled & tapped.. So either buy another bolt and get it done so you can swap straight over or get yours out then get someone to tap it 1/8th npt i think
    Arden Astra with black bits

  5. #5
    VXRed
    Join Date
    9th January 2018
    Posts
    69

  6. #6
    VXR enough Markpvxr's Avatar
    Join Date
    10th July 2012
    Posts
    1,122

    Default

    yeah
    Arden Astra with black bits

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts