+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17

Thread: H&R coils

  1. #1
    VXR enough Jon1796's Avatar
    Join Date
    24th August 2015
    Posts
    1,446

    Default H&R coils

    Whoís on h&r /hatch back whatís the drop on the back, as Iíve got a set to put on mainly for the fronts huge gap ???

    Sent from my iPhone using Tapatalk
    Last edited by Jon1796; 8th August 2018 at 07:14 PM.

  2. #2
    VXRed blooded
    Join Date
    11th July 2014
    Posts
    366

    Default

    I have H&R's, the drop at the front is a lot compared to standard. The rear does drop of course, but not as much as the front, even though they are -40mm all round.

    Ride quality is on the firm side, but as standard they ride hard with 19's and IDS. I'd like to compare to Eibach in terms of ride comfort, body roll etc as Eibach were excellent on my old Vectra B 2.6 SRi

  3. #3
    VXRed blooded
    Join Date
    11th July 2014
    Posts
    366

    Default

    I have H&R's, the drop at the front is a lot compared to standard. The rear does drop of course, but not as much as the front, even though they are -40mm all round.

    Ride quality is on the firm side, but as standard they ride hard with 19's and IDS. I'd like to compare to Eibach in terms of ride comfort, body roll etc as Eibach were excellent on my old Vectra B 2.6 SRi

  4. #4
    VXR enough Jon1796's Avatar
    Join Date
    24th August 2015
    Posts
    1,446

    Default

    I donít mind a firm ride. I changed the rears last year I think, as the originals were getting soft, just threw on some ecp thirty quid ones they dropped it and firmer. I donít wonít to go lower on the rear.
    When I get a chance Iíll have to get my hands dirty and get them on front first then see how the rears compare.
    Thank you.


    Sent from my iPhone using Tapatalk

  5. #5
    Are you VXR enough?
    Join Date
    14th August 2013
    Posts
    831

    Default

    [IMG][/IMG]

    This is what mine looked like

  6. #6
    Are you VXR enough?
    Join Date
    28th September 2009
    Posts
    969

    Default

    Looks similar to mine but I have daps on the front and eibach on the rear. Changing front to eibach when I have some time free, tired of scraping over speedhumps. Hoping the eibach springs lift the front slightly

  7. #7
    VXR enough Jon1796's Avatar
    Join Date
    24th August 2015
    Posts
    1,446

    Default

    You two buggers are on night shift !!! Lol
    I miss those shifts.
    Sinbrad picture didnít come out.
    No sorry it didn't come on tt but it did on vxrol.
    That's definitely lower than mine at the moment.

    Sorry about the bald Git in the reflection......


    Sent from my iPhone using Tapatalk
    Attached Images
    Last edited by Jon1796; 10th August 2018 at 06:36 AM.

  8. #8
    VXR enough Jon1796's Avatar
    Join Date
    24th August 2015
    Posts
    1,446

    Default H&R coils

    Quote Originally Posted by sinbrad View Post
    [IMG][/IMG]

    This is what mine looked like
    Did that push the toe out on the rear when you put them on ?
    Managed to get mine to minimum camber before toe wonít adjust any further in.


    Sent from my iPhone using Tapatalk

  9. #9
    VXR enough Jon1796's Avatar
    Join Date
    24th August 2015
    Posts
    1,446

    Default

    Got board whilst waiting to tip and ordered this.
    https://rover.ebay.com/rover/0/0/0?m...2F123166525859
    Hopefully might speed the job up a little. When I get round to do them.


    Sent from my iPhone using Tapatalk

  10. #10
    VXRed slacky555's Avatar
    Join Date
    29th March 2012
    Posts
    218

    Default

    I went from DAP’s to eibach and prefer the look of the Dap’s and can’t tell much difference in ride. Just gutted I couldn’t get another set of DAP’s.
    A few little bits to give me 335BHP

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts