+ Reply to Thread
Results 1 to 4 of 4

Thread: P0136-48

  1. #1
    VXRed Muncie's Avatar
    Join Date
    15th September 2014
    Posts
    71

    Default P0136-48

    Can anyone tell me if this is the result of gutting my pre cat? I had put in a 90į spacer but I have a feeling this hasent stopped this code. The reason I ask is my car was off the road for the last 12 month and while it was in the garage for all that time I did a few mods One of them being the decat.

    Sent from my SM-G925F using Tapatalk

  2. #2
    VXR enough V6spike's Avatar
    Join Date
    18th May 2013
    Posts
    1,776

    Default

    Bank 1 did you put the spacer? Itíll need mapping out or clearing the DTC. However I think a spacer isnít required??? If so Iím sure Iíve read on bank 2


    Sent from my iPhone using Tapatalk
    '55' Sapphire Black VXR Estate. Eibach Prosport all round, remapped by Rabbid. DO88 intake kit.

  3. #3
    VXRed Muncie's Avatar
    Join Date
    15th September 2014
    Posts
    71

    Default

    Iv put a 90į spacer in the second 02 sensor bank 2. I tried to clear the code with vaux com but it's pending so it never clears. I will get it mapped out if the decat is the issue I just don't want to go book it in and get turned away becuse of other issues.

    Sent from my SM-G925F using Tapatalk

  4. #4
    VXR enough Jon1796's Avatar
    Join Date
    24th August 2015
    Posts
    1,331

    Default

    You might have to do some checking, wiring, disconnect sensor, see if it can tell if itís missing or replace it. Plus check for any leaks from inlet to manifold past sensor.
    The 90% might also have taken it out to far, isnít more common to put the straight spacers on ???
    You could also do a live data run and record it and go though data to see if itís anything else.

    http://www.carnewscafe.com/2014/10/p...-engine-codes/

    https://www.engine-light-help.com/ox...sor-codes.html


    Sent from my iPhone using Tapatalk

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts