+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 15 of 15
  1. #11
    VXRacing ahead mik_ok's Avatar
    Join Date
    25th November 2011
    Posts
    689

    Default

    It’s about 7yrs since I did mine, so can’t really remember.

    They are mentioned on this HSV forum thread

    Which shows this image. Which I assume is accurate.
    2017 Jaguar F-Pace 3.0d S for her
    2014 Lotus Evora S (SportsRacer) for him

  2. #12
    VXRed
    Join Date
    6th September 2013
    Posts
    14

    Default Update Weds 17 Oct on Cold Weather Rapid Flashing.

    Quote Originally Posted by mik_ok View Post
    It’s about 7yrs since I did mine, so can’t really remember.

    They are mentioned on this HSV forum thread

    Which shows this image. Which I assume is accurate.
    Just what I needed, shows me what to look for.
    I'm away now for a couple of days, but will strip the boot lining out over the weekend and see what I've got.
    Thanks again to all for your valuable guidance so far!

  3. #13
    VXRed MontyPythonX's Avatar
    Join Date
    28th August 2014
    Posts
    129

    Default

    20181020_110203.jpg

    These are the patch leads on my 57 plate VXR8

  4. #14
    VXRed
    Join Date
    1st January 2016
    Posts
    46

    Default

    Has anyone cut the cover off to see what is inside ? I suspect if just a resistor or the like then could one be cut into the original loom ?

  5. #15
    VXR newbie
    Join Date
    24th September 2014
    Posts
    9

    Default

    This isn't going to be useful at the moment but I had a diagram of the fix including the resistor not long ago - I'll try to find it. From memory it is just one resistor required between the yellow and yellow/black. This obviously isn't a fix for those with dead LEDs or blown solder joints etc.

+ Reply to Thread
Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts