+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: CIM replacement

  1. #1
    VXR enough V6spike's Avatar
    Join Date
    18th May 2013
    Posts
    1,801

    Default CIM replacement

    CIM is goosed but car still runs so I’ll have to replace it. Been an expensive month for the car with all the niggly things going wrong with her at the minute. Spent about £650 already for pissy little bits.

    Anyway. Who has replaced theirs? I need the correct part number and indent letters please.



    Sent from my iPhone using Tapatalk
    '55' Sapphire Black VXR Estate. Eibach Prosport all round, remapped by Rabbid. DO88 intake kit.

  2. #2
    VXR enough Jon1796's Avatar
    Join Date
    24th August 2015
    Posts
    1,386

    Default

    You’ve got oc ?
    If it lets you in it’ll tell you part no. When you first look at it.
    Or take covers off written in big type on it.

  3. #3
    VXR enough Jon1796's Avatar
    Join Date
    24th August 2015
    Posts
    1,386

    Default

    If you can have the car sat a few days or trip to Norwich

    https://www.jccars.co.uk/Vauxhall/Va...rogramming.htm

  4. #4
    VXR enough V6spike's Avatar
    Join Date
    18th May 2013
    Posts
    1,801

    Default

    Won’t let me get into it mate. Where exactly do I need to look?


    Sent from my iPhone using Tapatalk
    '55' Sapphire Black VXR Estate. Eibach Prosport all round, remapped by Rabbid. DO88 intake kit.

  5. #5
    VXR enough Jon1796's Avatar
    Join Date
    24th August 2015
    Posts
    1,386

    Default

    Ident no. UY which is mine front left take off top cover turn wheel to left.

    Pic from eBay https://www.ebay.co.uk/itm/NEW-ORIG-...-/263515703865
    Last edited by Jon1796; 29th October 2018 at 10:10 AM.

  6. #6
    VXR enough V6spike's Avatar
    Join Date
    18th May 2013
    Posts
    1,801

    Default

    how do i get the top cover off?
    '55' Sapphire Black VXR Estate. Eibach Prosport all round, remapped by Rabbid. DO88 intake kit.

  7. #7
    VXR enough Jon1796's Avatar
    Join Date
    24th August 2015
    Posts
    1,386

    Default

    Turn wheel 90% you’ll see a cap on shroud, knife or small flat head to remove then cross head screw turn 180% to do other side. One underneath in hole torque screw, pull out ignition cover. The stork boots just come out easy enough.
    That’ll give you a look.


    The center sliver trim on dash, ether side pull off, long one p/s very short one d/s it’s on spring clips that’ll let you slide out the leather et cover in front of dash connected to top cover.
    Last edited by Jon1796; 29th October 2018 at 01:49 PM.

  8. #8
    VXR enough V6spike's Avatar
    Join Date
    18th May 2013
    Posts
    1,801

    Default

    cheers mate, i take it to remove the CIM its going to steering wheel off job
    '55' Sapphire Black VXR Estate. Eibach Prosport all round, remapped by Rabbid. DO88 intake kit.

  9. #9
    VXR enough Jon1796's Avatar
    Join Date
    24th August 2015
    Posts
    1,386

    Default

    Yeah have you done that yet ?

  10. #10
    VXR enough V6spike's Avatar
    Join Date
    18th May 2013
    Posts
    1,801

    Default

    no mate im at work
    '55' Sapphire Black VXR Estate. Eibach Prosport all round, remapped by Rabbid. DO88 intake kit.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts