AFL headlights

[IsOoAvinOne]

Hi all, anybody know of any Afl’s that are for sale or where to get some from? Thanks

[COSWORTH]

Flea bay or vaux breakers.
Private ads online as they are now worth more in parts than complete cars.

[w20adm]

I presume you know of the hassle to actually get them to work?

[82Matt]

I presume you know of the hassle to actually get them to work?

Aren't the bulbs silly money too?

Sent from my SM-G965F using Tapatalk

[w20adm]

65-70 quid for the decent ones.

[tye_time]

I will get bi-xenons at some point, cheaper and less hassle, while looking identical!

[w20adm]

I will get bi-xenons at some point, cheaper and less hassle, while looking identical!

Ah the fraudsters way .......

[IsOoAvinOne]

Hi all. Managed to source some lights with everything needed to fit other than the loom that runs from the rear level sensor on the rear beam to the control module behind the glove box. Anybody any ideas where or who to talk to about getting hold on one?

Also I’ve retro fitted mine and my mates AFLs recently but just trying to see if I can get my Mrs set working proper.

[ptwarlord]

Hi all. Managed to source some lights with everything needed to fit other than the loom that runs from the rear level sensor on the rear beam to the control module behind the glove box. Anybody any ideas where or who to talk to about getting hold on one?

Also I’ve retro fitted mine and my mates AFLs recently but just trying to see if I can get my Mrs set working proper.

Hi

Well if you can manage, it will be easier and cheaper to make the loom yourself, its just 3 wires.

You buy part n/ 93186708 (the connector and cables for the axle sensor) and then extend the loom to the control module.
Later i can tell you the wiring diagrams, but its relatively easy to do.

And by the way, you might be able to help me: how do you get the cables thru the firewall to the UEC?
That's my struggle, its seems impossible to add more cables to the original grommet.
Thanks

[ptwarlord]

So the wiring for the leveling sensor is as follows:

Pin 1 from the level sensor goes to pin 11 on the AFL leveling control module
Pin 2 goes to pin 10
Pin 3 goes to pin 7

Give it a try, you buy the part number I told you about and just extend the wires.
If you need the plug for the control module, I think it's the same as the window switch and the climate control module, you have to find it used.

I hope this helps