+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    VXRed
    Join Date
    15th August 2016
    Posts
    63

    Default Tx sportscat and lambda sensors

    Got to pick up my tx sportscat from dpd tomorrow as missed it Friday, I was just thinking is there a place to put the 2 lambda sensors on sportscat downpipe looks like there is but hard to tell from picture, plus when sensors fitted will it bring on the management light or will the management light stay off with the first precat missing, or do I need to get warning light tech 2 deleted, once again thanks for any Info as I'm not the best with the mechanical side of cars

  2. #2
    VXR Nothing comes close VXRRy's Avatar
    Join Date
    15th May 2013
    Posts
    17,928

    Default

    There are 2 holes on it for lambdas mate. One for the first where the precat usually is and one post main cat.

    I had one so know

    You will need a 90 degree elbow spacer unless you are having it mapped



    Sent from my iPhone using Tapatalk

  3. #3
    VXRed
    Join Date
    15th August 2016
    Posts
    63

    Default

    Quote Originally Posted by VXRRy View Post
    There are 2 holes on it for lambdas mate. One for the first where the precat usually is and one post main cat.

    I had one so know

    You will need a 90 degree elbow spacer unless you are having it mapped


    Sent from my iPhone using Tapatalk
    Cheers mate, I'll be having it mapped, is that because it will bring on light and during map they can take light off, the 90 degree elbow spacer were does that go, on sensor were the precat used to be or on secound sensor past the sports cat

  4. #4
    VXR Nothing comes close VXRRy's Avatar
    Join Date
    15th May 2013
    Posts
    17,928

    Default

    Past the sports cat mate. Never stick a spacer on the first one!


    Sent from my iPhone using Tapatalk

  5. #5
    VXRed blooded Andyb712's Avatar
    Join Date
    28th July 2018
    Posts
    449

    Default

    Just curious what you running for catback?
    2009 Astra H Vxr arden blue uprated gearbox endcase with bigger bearings, 3" cobra catback non res with toyosport 2.5 double decat, mtc crossover delete and tophat

    Planning to go stage 3/3.5 eventually

  6. #6
    VXRed
    Join Date
    15th August 2016
    Posts
    63

    Default

    Quote Originally Posted by Andyb712 View Post
    Just curious what you running for catback?
    Tx sports cat with milteck exghaust

  7. #7
    VXRed
    Join Date
    15th August 2016
    Posts
    63

    Default

    Quote Originally Posted by VXRRy View Post
    Past the sports cat mate. Never stick a spacer on the first one!


    Sent from my iPhone using Tapatalk
    Cheers mate

  8. #8
    VXRed blooded Andyb712's Avatar
    Join Date
    28th July 2018
    Posts
    449

    Default

    How do you rate the sound

    And is your miltek res or non res?
    2009 Astra H Vxr arden blue uprated gearbox endcase with bigger bearings, 3" cobra catback non res with toyosport 2.5 double decat, mtc crossover delete and tophat

    Planning to go stage 3/3.5 eventually

  9. #9
    VXRed
    Join Date
    15th August 2016
    Posts
    63

    Default

    Quote Originally Posted by Andyb712 View Post
    How do you rate the sound

    And is your miltek res or non res?
    It's none res and the sounds not to loud on tickover it's a nice rumble so won't wake the neighbours on a morning, there's a few videos on YouTube with vxrs with exactly the same set up on as I'm having fitted on Friday, having intercooler fitted Saturday then just wait for shaun of sm tuning to map it

  10. #10
    VXRed blooded Andyb712's Avatar
    Join Date
    28th July 2018
    Posts
    449

    Default

    Sweet getting the same front pipe at some point

    Got the cobra non res cat back 3" on the way at the min in the post

    Got the toyosport 2.5 decat and precat delete on at the min to mate with cobra when it arrives but like you want the sport cat instead, the double decat is just temporary thanks to my original exhaust kicking the bucket at the worst time possible was going to get a custom made one but didn't have the cash at the time my original one broke
    2009 Astra H Vxr arden blue uprated gearbox endcase with bigger bearings, 3" cobra catback non res with toyosport 2.5 double decat, mtc crossover delete and tophat

    Planning to go stage 3/3.5 eventually

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts