+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    VXR enough Hayden_93's Avatar
    Join Date
    4th January 2014
    Posts
    1,237

    Default Actuator / recirculating valve

    Hi all as most of you may know Iím on my way to stage 3 is it worth upgrading both of them or just leave them both whatís your thoughts thanks a lot


    Sent from my iPhone using Tapatalk

  2. #2
    VXR enough nippyrascal's Avatar
    Join Date
    25th September 2013
    Posts
    1,098

    Default

    I have been stage 3 for ages and both mine are standard never had a problem , do have a new forge valve but never bothered to fit it, only upgrade if you have a failure on one of them.
    stage 3

  3. #3
    VXR enough Hayden_93's Avatar
    Join Date
    4th January 2014
    Posts
    1,237

    Default

    Quote Originally Posted by nippyrascal View Post
    I have been stage 3 for ages and both mine are standard never had a problem , do have a new forge valve but never bothered to fit it, only upgrade if you have a failure on one of them.
    Cheers man


    Sent from my iPhone using Tapatalk

  4. #4
    VXR Nothing comes close VXRRy's Avatar
    Join Date
    15th May 2013
    Posts
    17,939

    Default

    Quote Originally Posted by Hayden_93 View Post
    Hi all as most of you may know Iím on my way to stage 3 is it worth upgrading both of them or just leave them both whatís your thoughts thanks a lot


    Sent from my iPhone using Tapatalk
    Leave them Malcolm.

    Mine was Stage 3.5 with a standard recirc. It did split but replaced it with another standard. Had noting but grief with the Turbosmart one.

    As for actuator Iíd have probably made better power at Stage 3.5 with a standard actuator as the Turbosmart one I had was too strong and I ended up with valve float.




    Sent from my iPhone using Tapatalk

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts