+ Reply to Thread
Results 1 to 7 of 7
  1. #1
    VXR newbie
    Join Date
    12th August 2017
    Posts
    7

    Default Lowering insignia vxr

    Im looking for some help/advice on lowering my insignia vxr, i would like to lower 30 or 40mm but cant find springs that will go that low does anyone know if any companys make them or are the only ones around the h&r that lower 15-25 mm
    I apreciate any advice thanks

  2. #2
    VXR enough
    Join Date
    9th August 2011
    Posts
    2,599

    Default

    i reckon anything lower than 25mm can cause issues with other mechanicals such as drive shafts and the like

  3. #3
    VXRed blooded
    Join Date
    3rd September 2015
    Posts
    420

    Default

    H&R are absolutely brilliant on siggy

    So much improved handling, and no comfort impairment.

    By far the best mod I've done on mine. Second one was the brake pads

  4. #4
    VXRed
    Join Date
    27th February 2016
    Posts
    141

    Default

    Which PN of H&R springs did you use?

  5. #5
    VXR newbie
    Join Date
    12th August 2017
    Posts
    7

    Default

    Thanks for the advice im gunna go with the h&r ����

  6. #6
    VXRed blooded
    Join Date
    1st August 2016
    Posts
    472

    Default

    You use the ones that match your car /hang
    Vectra VXR estate 07

  7. #7
    VXRed blooded
    Join Date
    3rd September 2015
    Posts
    420

    Default

    Fitted 28998-7 as mine was a limo

    28998-7 is for Limo/Sedan : http://www.h-r.com/en/produktfinder.html# with Opel/Insignia/limo/sedan OPC model/0G-A

    (Lowers Front 20-25mm and Lowers Rear 15-20mm).

    28998-8 is for SW

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts