![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|||||||
| Register | Social Groups | Calendar | Gallery | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
VXR enough
Join Date: 20th April 2008
Posts: 1,601
|
I need a recommendation for a swirl/light scratch remover for use by hand.
Whole car needs doing after the bodyshop swirled it. At the mo I can't stretch to a machine polisher or a pay for a correction detail. Any ideas?
__________________
Astra VXR - 19's, Bluetooth, Full JP Exhaust System, Courtney Sport Panel Filter, DAP R Springs, Whiteline RARB, EDS Stage 2 Remap, Collins Actuator, Tarox Discs, Satin Black Diffuser..... |
|
|
|
|
#2 |
|
VXR - I am the LAW
Join Date: 7th August 2008
Posts: 10,277
|
Its going to be tough going by hand mate, you wont get rid of them all by hand as a polisher is really needed for that. If you have to do it by hand then i would say super resin polish as it has fillers in to mask defects that you havent got out.
__________________
"Life is like a box of chocolates............your bound to pick the one you hate"
|
|
|
|
|
#3 |
|
VXRed blooded
Join Date: 17th June 2008
Posts: 472
|
As jay says super resin polish. I had light swirls on my car, worked it in by hand and i cant see them anymore. They may just be filled but atleast i cant see them
http://www.autopia.org/forum/detaili...oval-hand.html check here, it shows swirl removal by hand + results. Took 5 hits with autoglym worked in to remove them. Check youtube out theres vids of how to work it in. Your arm hurts!
__________________
Not yet a owner of a corsa vxr... but £6000+ into saving for one!! |
|
|
|
|
#4 |
|
VXR Torque of the Devil
Join Date: 3rd August 2008
Posts: 7,759
|
I can put money on it the body shop didnt swirl it infact its the Steam washer and chemicals they use to clean them strips everything off, your car has probibly always had the swirl but its been protected by a cover up type wax and polish. All garages will do that to your motor mate.
__________________
![]() |
|
|
|
|
#5 |
|
VXR Living The Quiet Life
Join Date: 22nd August 2008
Posts: 348
|
SRP is good for masking them.
You could try Poorboys SSR 2.5, Its going to be hard work by hand tho. I think Duragloss 671 is given a good right up for using by hand, never used it personnaly. If it was me i would use SRP to mask them and save for the machine if you want to remove them.
__________________
Arden Blue , Sat Nav, Bluetooth, Climate, Full Leather, Heated seats, IDS+, 19"'s,Cruise Control, AFL Xenons, Keyless entry and push button start, Percy CDTi set up, Percy Top Hat mo with Polished boost pipes, Percy Breather box & oil restrictor bolt, Courtaney Pannel filter, Carbon Mirrors, Carbon Diffuser, Milltek Cat Back, RARB |
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|