3 gauge conversions

[AddVXR]

First just want to say thanks to you guys for been very patient and waiting for my thread as some of you know i'm gonna be makeing up some 3 gauge conversions for you lot on here.
Then might breanch out to other forums once demand has died down abit on here.

--------------------------------------------------------------------------
So prices are as as below

The trim made up to your spec 2,4,6 button with or without keyless finshed in piano black with a 2k lacquer top coat resistant to chips etc or matt silver for the older cars

£125 collected or £135 posted (fully insured etc due to cost)

--------------------------------------------------------------------------

For thoes that want the full kit for easy DIY fittment (aslong as you can service a car your be fine)
I'll be doing the trim with gauges fitted i'm gonna be useing Vinci gauges that have a clear lens but the dials are black when off and light up when the cars started these gauges are useing a lot of components that are found in Defi gauges are really accreate with a fast reaction time all 3 gauges sweep and light up in blue, red, amber, green or white. with all looms made up ready for a nice installation that will look very OE.

My set up is slighty different to to kit supplyed but are the same gauge but with a different dials the one supply are the same as in the pic below with no logo and all in one colour



FULL KITS

3 gauge trim (as above)
3 Vinci gauges oil temp, water temp and boost in PSI or BAR in blue, red, anber, green or white you can change type or gauges if you want but price will vary. (all guages will be facing the driver due to a mod i do to the trim and gauges unlike other kit's i've seen)
water temp adapter with hose clips
oil sandwich plate with new tread extension bolt
New GM oil filter (you will need about 1/2L of oil)
All looms made up with senders, power and earthing points etc
clear vacuum hose can supply Coloured Silicon hose at extra cost of £6
A little something to block off your are vents with (which is fully reversible)

£385 collected or £415 posted (fully insured etc due to cost)

£460 fitted you will need to come to me for this service.

--------------------------------------------------------------------------

FULL GAUGE KITS

3 Vinci gauges oil temp, water temp and boost in PSI or BAR in blue, red, anber, green or white you can change type or gauges if you want but price will vary.
water temp adapter with hose clips
oil sandwich plate with new tread extension bolt
New GM oil filter (you will need about 1/2L of oil)
All looms made up with senders, power and earthing points etc
clear vacuum hose can supply Coloured Silicon hose at extra cost of £6
A little something to block off your are vents with (which is fully reversible)

£260 collected or £275 posted (fully insured etc due to cost)

--------------------------------------------------------------------------

GAUGE KITS

3 Vinci gauges oil temp, water temp and boost in PSI or BAR in blue, red, anber, green or white you can change type or gauges if you want but price will vary.
All looms made up with senders, power and earthing points etc

£210 collected or £220 posted (fully insured etc due to cost)

--------------------------------------------------------------------------
WATER ADAPTERS

water temp adapter with hose clips

£13 collected or £16.50 posted

--------------------------------------------------------------------------

SANDWICH PLATES

oil sandwich plate with new tread extension bolt

£31 collected or £35 posted

--------------------------------------------------------------------------

TREAD EXTENSION BOLTS

new tread extension bolt

£10 collected or £13 posted

--------------------------------------------------------------------------

will be looking into fitting for theos that need it fitted at a later date.

for peeps thats are 100% that they what one please give me a PM with your spec and what you want and exp date you will be wanting it so i can get a list going and know what i need to make up and get on order etc due to 2-3 week wait on new dash trim form VX.

[PaulieMB]

That's great Add! When mine is ready, ..please let me know, so I can arrange payment for you . x

[stewarty-vxr]

That looks absolutely stunning buddy

[W11 VXR]

That looks mint mate put my name down for the full kit please. my dash is the same as that but with 2 more buttons.

[whytie-vxr]

where can you see the clear vacuum hose? my engine bay has alot of blue so if its very visable i would get it in blue, but want to know where you would see the hose?

[nige87]

Good luck with selling these mate. Getting the 3 gauge mod done in mine was the best mod I did. These should sell well and I'd highly recomend it to any one

[scottg2540]

looks good might be interested when i have sum funds as just bought my burg yesterday

[AddVXR]

Originally Posted by whytie-vxr

where can you see the clear vacuum hose? my engine bay has alot of blue so if its very visable i would get it in blue, but want to know where you would see the hose?

it hooks up to the fuel pressure regulator if you still have the crossover pipe you carn't really see it but if you have the 1.9 box in for £6 it look a lot neater i have a black one on mine

[PaulieMB]

Can you get the silicone hose in red Adam? If not red, ..I'd be happy to go with black . x

[AddVXR]

Originally Posted by PaulieMB

Can you get the silicone hose in red Adam? If not red, ..I'd be happy to go with black . x

Reds no problem can get them in blue,red or black