Hks ssqv help!!!!

[jord99]

Right

Ive fitted the ssqv, it runs fine but threw up an error light, so i dissconnected the battery and left for 10minutes, now my date/time is all wrong!
Also as soon as i pulled up the road and hit boost, inspection light comes back and it doesnt let me run boost, any ideas what this could be as i know a few people have just had these fitted....

Thanks in advance

[R34nel]

It's weird cos I've used three different dv's on the astra for over a year and never had any lights on or other problems

[jord99]

Ive never fitted one before this one, but followed the how to on here?
If only someone from here was closer to me that knew what they was doing could have a look!

[Vxr Jase]

u got a pic of how it luks mate we may spot sumat wrong

[jord99]

u got a pic of how it luks mate we may spot sumat wrong

Il just go take some now mate, 5 minutes!

[Vxr Jase]

Il just go take some now mate, 5 minutes!

no probs fella

[jord99]

Dunno if you can see what needs to be seen but worth a go!

[worky]

Are you sure the jubilee clip nearest the throttle body is secured properly? I can see a bit of a gap but it might be just that its the way you have nipped the clip up on the dump valve take off pipe.

[Vxr Jase]

well uve wired it up right fella, luks ok to me. and ive fitted dvs before..altho dont u need a spacer for the hks????

[jord99]

Are you sure the jubilee clip nearest the throttle body is secured properly? I can see a bit of a gap but it might be just that its the way you have nipped the clip up on the dump valve take off pipe.

I just doubled checked all of them mate, seemed fine and all tight!
Since i dissconnected my battery, i lost the time and date to, and they wont reset without a standard headunit will they?

[worky]

What fault codes are you getting too?

[Vxr Jase]

[QUOTE=worky;1377142]Are you sure the jubilee clip nearest the throttle body is secured properly? I can see a bit of a gap but it might be just that its the way you have nipped the clip up on the dump valve take off pipe.[/QUOTE

luks ok to me mate

[jord99]

What fault codes are you getting too?

ECN: 11065A mate

[worky]

[QUOTE=Vxr Jase;1377150]

Are you sure the jubilee clip nearest the throttle body is secured properly? I can see a bit of a gap but it might be just that its the way you have nipped the clip up on the dump valve take off pipe.[/QUOTE

luks ok to me mate

Yeah just noticed a small bit of a gap buts likely just because the jubilee is secured away from the end of the dump valve take off pipe.

[worky]

ECN: 11065A mate

Did you connect anything else during the install? Could you have knocked a pipe off the inlet when cutting the original pipes at the fuel regulator? Do you hear the turbo stall?

Is the original recirc valve still plugged in?