Announcement

Collapse
No announcement yet.

safe boost

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • safe boost

    went to regals rr day and my boost peaked at 1.8 bar which is far to much for a standard turbo, so i lowered my boost on the actuator but feels slow now what is safe boost on standard turbo on the sport button so not used all the time.

  • #2
    why **** about with your actuator from standard mate??

    Comment


    • #3
      Originally posted by W4GCN View Post
      why **** about with your actuator from standard mate??
      its got stage 2 remap and full remus and yesterday on the rollers it hit 1.8 bar of boost which is to much.

      Comment


      • #4
        GCL Tunings stage 3 car uses 1.8 bar to hit 311bhp. What bhp did you get with that amount of boost?

        Comment


        • #5
          Originally posted by cjturbo View Post
          its got stage 2 remap and full remus and yesterday on the rollers it hit 1.8 bar of boost which is to much.
          Surley thats an issue to take up with the tunner who adjusted your Boost?

          Comment


          • #6
            Originally posted by colinm2 View Post
            GCL Tunings stage 3 car uses 1.8 bar to hit 311bhp. What bhp did you get with that amount of boost?
            i got 292bhp and 357lb torque

            Comment


            • #7
              Originally posted by W4GCN View Post
              Surley thats an issue to take up with the tunner who adjusted your Boost?
              yup mate!im with you! who mapped it?

              sigpic


              Comment


              • #8
                Originally posted by cjturbo View Post
                i got 292bhp and 357lb torque
                very good stage 2 figures mate. what map are you using?

                Comment


                • #9
                  Originally posted by colinm2 View Post
                  very good stage 2 figures mate. what map are you using?
                  ipf from regal but it wasnt using that much boost when they done it. the power was 286bhp and 349lb torque but boost was less but warmer day

                  Comment


                  • #10
                    what boost does it hold at?

                    Comment


                    • #11
                      Originally posted by colinm2 View Post
                      what boost does it hold at?
                      on the rollers it goes straight up to 1.8 bar and drops off to 1.6 then keeps falling to 1 bar at 5500 rpm

                      Comment


                      • #12
                        so what boost is safe to have peak and hold

                        Comment


                        • #13
                          They are exactly the same boost levels as mine. But mine is an eds ipf stage 3 map.

                          Comment


                          • #14
                            so let me get this right! regal mapped your car! you then had it rr at regal today and they said the boost is too high! away and screw it down abit?

                            sigpic


                            Comment


                            • #15
                              Originally posted by randomgary View Post
                              so let me get this right! regal mapped your car! you then had it rr at regal today and they said the boost is too high! away and screw it down abit?
                              yeah when i came back a month later it was over boosting and they said i need a boost gauge and need to adjust the actuator.

                              Comment

                              Working...
                              X