Announcement

Collapse
No announcement yet.

Fitting Forge Bar

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fitting Forge Bar

    Is anybody about tomorrow near me that could kindly fit the lower forge bar for me I am happy to pay.

    Thanks.

  • #2
    Sorry should say I live in southend

    Comment


    • #3
      Mate it's two bolts. I did mine today took me 5 minutes. Jack it up or park clever with enough to get up. Get a 16mm socket and ratchet. Crack the two bolts, take old one off and bolt back up. The bolts will most likely be tight, I used a nut runner.

      Comment


      • #4
        I dont really have any tools is the problem

        Comment


        • #5
          Ahhh I see. I'm sure any garage would do it for £10. Its a real easy job and as I said takes literally 5 minutes mate.

          Comment


          • #6
            Ok thanks for the advice mate

            Comment


            • #7
              No problem

              Comment


              • #8
                Originally posted by Jason_Mark_3 View Post
                I dont really have any tools is the problem
                You only really need 17" socket and rachet and a trolley jack if you can lend them off someone and yes it is a 17mm and not a 16mm

                Here's a detailed "how to" I done last year when I fitted mine:
                http://www.vxronline.co.uk/forum/sho...subframe-brace.
                sigpic

                Comment


                • #9
                  Ok thanks mate

                  Comment


                  • #10
                    Originally posted by Mark View Post
                    You only really need 17" socket and rachet and a trolley jack if you can lend them off someone and yes it is a 17mm and not a 16mm

                    Here's a detailed "how to" I done last year when I fitted mine:
                    http://www.vxronline.co.uk/forum/sho...subframe-brace.
                    Mine were deffinately 16mm lol. I tried a 17mm and the spanner just slipped. 16mm fitted fine.

                    Comment


                    • #11
                      mine was defo 16mm, i had it off yesterday

                      Comment


                      • #12
                        any noticable difference with one of these??? been thinking about getting one

                        Comment


                        • #13
                          Originally posted by Brian Fantana View Post
                          any noticable difference with one of these??? been thinking about getting one
                          Yes mate. I put mine on Friday and it feels so direct. Turns on alot quicker. Brilliant mod mate.

                          You know I only speak the truth.

                          Comment


                          • #14
                            get yourself a socket set from halfords!!

                            Comment


                            • #15
                              Originally posted by jwfcms View Post
                              get yourself a socket set from halfords!!
                              Snap-on FTW!

                              Comment

                              Working...
                              X