Announcement

Collapse
No announcement yet.

Dnt Removal

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dnt Removal

    Does anyone know if its possible to remove dents from back rear section on the passenger side on corsa's

  • #2
    Depends on alot of things... Post a pic?
    Corsa VXR Arden, 18's
    sigpic

    Comment


    • #3
      I have had a load of dents there.people opening doors on it so anoying.i had my local dealer to take them out when my car went in for repair and they did that for free

      Comment


      • #4
        Its possible i think..
        HeavenlyDetail
        .
        Youtube Channel - HeavenlyDetail

        Comment


        • #5
          I had a dent on the rear part of the car on my Astra....thanks to a BMW X5!

          I just went to a dent removal bloke and he was able to get it out. He couldn't quite get to it through the wheel arch but was able to remove the interior trim to get at it. You wouldn't even know it was there. Cost was £80.

          Comment


          • #6
            Dentwizard or Dentmaster can more or less remove any dent nowadays as long as the paints not broken. Do a search on the net as they are nationwide.Got my previous car done and I would never of imagined they would of got the two dings out off the rear quarter on the Signum

            Comment


            • #7
              Thanks for all your help, i am gng to ring a couple of companies monday morning

              Comment


              • #8
                this is where the dent is,

                what do people think?

                Comment


                • #9
                  I think mine was just slightly closer to the door but otherwise pretty much in the same location. They should be able to remove that fine although they may have to do it from inside the car by removing the trim as mentioned above.

                  Comment


                  • #10
                    somewhere on here is a post which shows a video of a dent being removed by first heating the panel with a hairdryer and then spraying on some kind of cold spray aerosol which causes the metal to expand and contract back into shape...im no good at finding old posts but im sure someone will help.....worth atry and save a few quid.
                    Son of the Clyde a roaming went
                    Sinned aplenty, much to repent
                    loved and lost, gave and took
                    Way too lazy to write a book.sigpic

                    Comment


                    • #11
                      think this is the one mate

                      http://www.metacafe.com/watch/501379...ith_airduster/
                      Son of the Clyde a roaming went
                      Sinned aplenty, much to repent
                      loved and lost, gave and took
                      Way too lazy to write a book.sigpic

                      Comment


                      • #12
                        http://uk.youtube.com/watch?v=4kYrCGYniA8

                        Theres loads on You Tube
                        Corsa VXR Arden, 18's
                        sigpic

                        Comment


                        • #13
                          Originally posted by IanVXR View Post
                          I think mine was just slightly closer to the door but otherwise pretty much in the same location. They should be able to remove that fine although they may have to do it from inside the car by removing the trim as mentioned above.
                          Thanks for your help,

                          Comment

                          Working...
                          X