My Arden Corsa: Day of trying to be a professonal

[Danny_vxR VXR enough Find all posts View Profile Close Danny_vxR]

Well from all the products iv been building up the last few weeks it was time to go in the deep end and go all pro haha (tried) may i say

Washed two bucket method with Chem Guys Glossworks
Dried
Clayed
Washed again with Dodo born to be mild
polished with Poor Boys
Glazed with Chem Guys ez creme glaze then quick spray of V7 sealent
Finally i applied Poor Boys Natty's paste wax
Finally this morning i applied Chem Guys Blacklight 2 coats with V7 spray ontop

alot i know but hey i had the day to myself

Heres the results: Pic heavy sorry

[Dan_vxR VXR Torque of the Devil Find all posts View Profile Close Dan_vxR]

oh no marc has started off a dodgy relflection shot of a hand now everyone wants to do it

i take it the above products are marcs and toms influence

However the car looks great

[P333TRM VXRed blooded Find all posts View Profile Close P333TRM]

car looks clean mate good work

[watoo vxr VXR Nothing comes close Find all posts View Profile Close watoo vxr]

Very shiney buddy..........Arms like popeye i quess......lol

[Danny_vxR VXR enough Find all posts View Profile Close Danny_vxR]

oh no marc has started off a dodgy relflection shot of a hand now everyone wants to do it

i take it the above products are marcs and toms influence

However the car looks great

haha yeah i had to throw the hand reflection in there
one or two items maybe mate

[Danny_vxR VXR enough Find all posts View Profile Close Danny_vxR]

Very shiney buddy..........Arms like popeye i quess......lol

dam right now mate no need for the gym haha

[Danny_vxR VXR enough Find all posts View Profile Close Danny_vxR]

car looks clean mate good work

cheers man

[Rich_VX VXRed blooded Find all posts View Profile Close Rich_VX]

Good effort mate. When it rains make sure you get the beading photos up. With that much wax and sealant it will bead really well. Just curious though I was told sealants are a little more difficult to make bond. Was the layer of wax before an issue?

[Danny_vxR VXR enough Find all posts View Profile Close Danny_vxR]

will do mate just waiting for the rain now never thought id say that but i want it to now haha, erm tbh no it wasnt dude

[Danny_vxR VXR enough Find all posts View Profile Close Danny_vxR]

Well it rained heres the beading shots

[watoo vxr VXR Nothing comes close Find all posts View Profile Close watoo vxr]

Nice beading shots buddy

[Danny_vxR VXR enough Find all posts View Profile Close Danny_vxR]

Thanks mate all the work paid off haha

[corsa9017 Have you fiddled recently? Find all posts View Profile Close corsa9017]

looks good mate! tell you had that hand in the water to long though

when you doin mine then?

[Jay VXR Nothing comes close Find all posts View Profile Close Jay]

looking good mate. just a couple of pointers.

after the first wash there is no need to dry the car before claying, the water infact helps to act as a lube.

the final products are a bit the wrong way round. if you want to apply a sealant and a wax (although IMO this is a waste of time and product) then the sealant needs to be applied first as sealants dont tend to bond to wax very well. so what i would have do is polish, glaze and then sealant, i.e. blacklight and forgotten about the wax. when you have applied the glaze there is no need to use v7, the reason for applying a glaze is to 1/ help enhance the look and b/ prepare the surface for a sealant, by applying v7 your undoing this step.

In addition glossworks contains gloss enhancers so is ideally to be used between wax's / sealant to help maintain the loo, if polishing then just use born to be mild.

[Danny_vxR VXR enough Find all posts View Profile Close Danny_vxR]

looks good mate! tell you had that hand in the water to long though

when you doin mine then?

haha yeah they seem wrinkly haha