Announcement
Collapse
No announcement yet.
Search Result
Collapse
250 results in 0.6368 seconds.
Keywords
Members
Tags
-
Glad you are happy with it, you were lucky to catch me on leave to be able to turn it around so quick.
-
-
-
Like it says on the CIM itself
Rotate clockwise until tight and then counter clockwise 2 full turns (should be 2 1/2 from tight) then align...
Leave a comment:
-
It will do with the wheel off,
Center it before putting it back on or first time on full lock the ribbon will snap resulting in knackered...
Leave a comment:
-
That is to keep the steering angle sensor centred when the steering wheel is off. Doesn't affect the operation of the CIM, you just need to make sure...
Leave a comment:
-
I would say the top 3 as they will have to be replaced to suit the new case, can't just do 6th....
Leave a comment:
-
Not correct I'm afraid.
Yes it can as can any coded item on the Astra H
I reset them by post http://www.diagnostics.org.uk...
Leave a comment:
-
I will shortly be selling the looms complete with the ballast power connector sliced in so no additional work is needed, just waiting upon some ballast...
Leave a comment:
-
AFL has 2 boxes under each light, bi xenon has 1 box and a blank.
Leave a comment:
-
That is it for normal headlights on his car.
You need the earth mod doing, some chop the wiring inside the light, some buy my looms. Needs...
Leave a comment:
-
You need to swap pins 6 and 7 over in each headlight and run a wire from the UEC to the light switch for the levelling to work when removing AFL.
Leave a comment:
-
Original 888s had 1 piece discs as in the photo. Alcon stopped making one piece and did a run of 2 piece with the crescents.
They were...
Leave a comment:
-
Was just going to say that would happen when trying to SPS as the remappers don't change software version numbers.
I've not seen a way to...
Leave a comment:
-
If you want to travel to the west mids, I can program it if you don't have your pass code.
Leave a comment:
Leave a comment: